Solar Cells Based on All-Inorganic Halide Perovskites:Progress and Prospects

The emergence of perovskite solar cells(PSCs)based on all-inorganic metal halide(IMH)has generated enormous interest in the photovoltaic research community,and the power conversion efficiency(PCE)has exceeded13%.Despite its outstanding performance in thermal stability,PSCs based on IMH still face problems such as the lack of a suitable band gap and the inability to generate large areas.In this review,we will summarize the latest progress of PSCs based on IMH.     

Efficiency Estimation of Electrothermal Thrusters Use in the Control System of the Technological Spacecraft Motion

The influence of various control systems of the orbital motion of a technological spacecraft on the level of microacceleration of its internal environment is simulated. Conclusions are drawn about the effectiveness of control systems with different actuators for realization of certain gravitationally sensitive processes onboard a spacecraft.     

面向多属性条件的空间对象检索算法

针对现有空间索引不能满足多样化的检索需求,提出两种新型空间索引,能够同时面向空间属性、文本属性与划分属性进行空间对象检索。将分类技术应用于空间对象检索中,提出了基于划分索引与IR-Tree的混合索引以及先划分索引再IR-Tree的索引方法,不仅满足了多样化的空间检索需求,而且有效地解决了传统空间索引更新维护代价大的问题。基于真实的北京市POI数据集进行实验,结果表明本文提出两种索引是有效的且检索效率高。与传统空间索引相比,提出的空间索引很好地解决了具有划分属性的空间对象检索问题,并且具有较高的检索效率。     

航空发动机限寿件疲劳可靠度计算新方法

针对目前的航空发动机限寿件（ELLP）疲劳可靠性分析中的小失效概率事件以及其极限状态函数具有较强非线性的特点，提出了一种具有自更新机制的半径外自适应重要抽样（AUMCROAIS）疲劳可靠性分析方法。该方法首先利用蒙特卡罗自适应重要抽样（MCAIS）快速逼近真实设计验算点（MPP）附近，随后以近似设计验算点为中心进行极坐标抽样，并依次构造主动学习函数，对近极限状态函数和抽样半径进行最优选取，从而实现最优抽样半径的更新，通过不断的更新确定出最优抽样半径，加速失效概率计算的收敛。本方法提高了设计验算点的收敛速度同时保证了计算精度，解决了小失效概率事件以及强非线性极限状态函数可靠度计算难题，最后以某型发动机压气机轮盘为对象应用本方法，并与传统的蒙特卡罗仿真（MCS）方法、蒙特卡罗半径外自适应重要抽样法（MCROAIS）和一阶可靠性方法（FORM）进行了对比，验证了本方法的高效率、鲁棒性和仿真精度。     

考虑测试性设计缺陷修正延时的测试性增长模型建模与评价方法

针对现有测试性增长模型忽略了测试性设计缺陷的修正延时过程，进而导致测试性增长模型（TGM）跟踪与预计精度低的问题，提出了一种考虑测试性设计缺陷修正延时的测试性增长模型建模理论与方法。首先分析测试性设计缺陷识别与修正之间的延时机理，得到剩余测试性设计缺陷（TDL）具有先增后减的铃形变化趋势；在此基础上，分别以Gamma、Raleigh和Delay-S 3种曲线拟合剩余测试性设计缺陷（RTDL）变化趋势，研究建立基于以上3种曲线考虑修正延时的测试性增长模型；最后，以某机载稳定跟踪平台测试性增长试验数据验证测试性增长模型拟合、跟踪及预计效能。研究结果表明：基于该测试性增长试验数据，Gamma曲线可以精确地拟合剩余测试性设计缺陷变化规律，测试性增长模型跟踪和预计精度可达到10^-2数量级。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

收集处理方法对含铝固体推进剂凝相燃烧产物特性影响

含铝固体推进剂凝相燃烧产物特性对固体火箭发动机的燃烧效率、燃烧稳定性和绝热安全性等影响重大。为获得准确可靠的凝相燃烧产物的理化特性,利用定压燃烧装置来收集凝相燃烧产物,采用马尔文激光粒度分析仪、扫描电镜及X射线衍射仪对产物进行表征,研究收集介质、干燥处理和超声分散对凝相燃烧产物性质的影响。结果表明,使用水收集获得的凝相燃烧产物平均粒度与氮气收集条件下相比大60%,水收集法适用于研究推进剂近燃面凝相燃烧产物。干燥处理能保证凝相燃烧产物样品中大尺寸颗粒的有效取样,在粒度测试之前需要对样品进行干燥处理来获取准确的凝相燃烧产物粒度分布数据。超声分散会导致大颗粒团聚物含量降低,小颗粒团聚物含量升高,最终显著降低凝相燃烧产物平均粒径。粒度测试时,在80kHz条件下,超声分散参数设定为40 W,5 min较为合适。基于研究结果,提出了一套科学合理的凝相燃烧产物收集处理方法。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.